February 26, 2024

12 Volt SLA battery charger 0.8 Amp with universal AC input

More lead acid battery chargers 6V, 12V, 18V, 36V, 42V, 48V

12 volt 800 mA peak multistage battery charger with universal AC input. Available with barrel connectors or alligator clips.
lead acid charger with universal AC input

lead acid charger with universal AC input

PowerStream now offers a series of overnight chargers for sealed lead acid batteries specifically designed for the personal electric vehicle market. Charge lead acid, SLA, sealed lead acid, Gel, AGM and VRLA batteries. These have the following attributes:

Quantity		1-10	11-100	101-500	501+
PST-3P10-12VA with alligator clips AKA PST- 3PA1015-A	For charging 12V Pb-Acid batteries	$20	$14.30	$12.80	$9.80
PST-3P10-12VB with barrel plug output AKA PST- 3PA1015-B	For charging 12 volt Pb-Acid batteries	$20	$14.30	$12.80	$9.80
PST-3P10-12VB-Euro	Charger with European AC plug and barrel connector	$25	$20	$15	$10.50
ZHJX002	For adapting the barrel connector version to screw terminals	$2.50 each
	PST-WX12 ---- Output adapter barrel plug kit Barrel Plug Adapters for PST-310-12VB7 connector kit (see list below)	$7.00
	Adapter, 5.5mm x 2.1 mm barrel connector to alligator clips on 18" zip cord	$3.25

Advantages:

Much lighter and smaller than transformer based chargers

Very low cost

Universal Power Input

Can be left on the battery to maintain the battery, for example over the winter.

These chargers are also used as replacement for 12 volt safety lights.

Chargers in stock now

Battery Charger Specifications

Model	PST-3P10-12V (3PA1015, 3P10-A1015)
Name	12 Volt charger for lead acid, sealed lead acid, etc.
Type	Battery Pack Charger for R/C, Robots, instruments
ROHS	ROHS available on special order

Battery Charger Technical Information

Rated input voltage	90-264 VAC, 50/60 Hz
Battery size	12 volt nominal SLA, VRLA, Gel, AGM, or flooded
Input Frequency	50-60 Hz
6 cells	12 volts nominal
Battery size	0.7 AH to 14+ AH
Charging current	0.8 amps or 800 mA (replaced the 750mA version)
Charger type	Lead Acid Chemistry
Charging algorithm	Constant current/constant voltage/float
	Stage 1 constant current 800 mA ± 100 mA
	--------------- For Stage 1 to start battery voltage must be above 4V
	Stage 2 constant voltage 14.75 volts ± 0.25 volts
	Stage 3 float charge 13.75 ±0.25 volts
	"Charged" light turns on and float charge starts when the charge current is below 0.20 amps ±0.05 amps when the battery charge voltage is above 14 volts.
Style	Desktop
Output power	14W maximum
Output voltage	14.75 volts maximum
Output options included	Sturdy 20AWG wires, rated to 80°C Alligator clips or 5.5 mm OD x 2.1 mm ID barrel More barrel connectors available separately, see below
Weight	150 grams, 0.15 kg, 0.33 pounds, 5 oz.
Cooling	Natural convection, no fan
Efficiency	>75%
Size	75 x 51 x 28 mm, 3 x 2 x 1 inches
Environment	-10°C to +40°C operating, -40°C to +70°C storage
Temperature rise	<40°C rise on case under any line voltage and maximum rated load
Vibration, Impact	5mm, 50Hz, 600 Seconds, 1 meter drop 3 times
Protections	Reverse Polarity, Short circuit protection
Safety	UL, cUL, CE marked, designed to ED60950, EN55022B
MTBF	30,000 hours by MIL-STD calculation
HiPot, ESD	Hi-Pot 3000 V, 1 minute ESD 8000V
LED Indications	Power on, but no battery connected	Green
	Charging	Red
	Finishing Charge	Green Flashing
	Charged/Float Charging	Green (may be dim Green)
	Reverse polarity or short circuit	Red and Green Flashing Alternately

Twelve optional DC Plugs slip over the 5.5 x 2.1 mm connector if desired.

2.35 OD x 0.7 ID Barrel
3.0 OD x 1.1 ID Barrel
3.5 OD x 1.35 ID Barrel
4.0 OD x 1.7 ID Barrel
4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
5.0 mm OD x 3.5 mm ID with center pin
5.5 mm OD x 1.5 mm ID type 2 Barrel
5.5 mm OD x 2.5 mm ID Barrel
6.3 OD x 3.0 ID center pin Barrel
6.0 OD x 4.4 ID center pin Barrel
7.4 mm OD x 5.0 center pin ID Barrel
7.9 OD x 5.6 ID center pin Barrel

Applications: Perfect for maintaining batteries on motorcycles that use heated gear from "Warm & Safe Heated Gear." Since the barrel plug adapter is exactly the same and the 800mA maximum charging current is safe for the adapter's fuse you can plug the charger into the power socket on the motorcycle and maintain the battery accurately overwinter. It doesn't have enough power to run the heated clothing directly, however.

[Home] [PowerStream] [Site Map]
[Tech Resources] [Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

700 mA 12V smart charger for AGM batteries, using a battery charger, mini battery charger, desktop battery charger, portable battery charger, 12 volt battery charger, 12 V battery charger, 12Volt lead acid battery charger

PowerStream Technology 1163 South 1680 West Orem, Utah 84058 USA Phone: 801-764-9060 Fax: 801-764-9061
© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Lund Instrument Engineering, Inc. All rights reserved. Google Author Verification