PowerStream Power supplies, battery chargers, batteries and packs, dc/dc converters, injection molding    View Shopping Cart
February 27, 2024

6 Volt 1.2 Amp lead acid battery charger with universal AC input and precise charge control


More lead acid battery chargers 6V, 12V, 18V, 36V, 42V, 48V
48 volt sealed lead acid and VRSLA batteries
48 volt switchmode battery chargers
36 volt battery chargers
36 volt switchmode battery chargers
24 volt high efficency, high power lead acid battery chargers
24 volt switchmode battery chargers
Small 6 volt lead acid battery chargers  six volt lead acid charger with universal AC input

6 volt 1200 mA peak multistage charger with universal AC input. Available with barrel connector or alligator clips. Charge lead acid, SLA, sealed lead acid, Gel, AGM and VRLA batteries.

.
PowerStream now offers this 6 volt charger using switchmode technology for 6 volt sealed lead acid batteries. These have a universal AC input and so can be used in any country in the world. These have the following attributes:
Quantity   1-10 11-100 101-500 501+
PST-3P10-6VA with alligator clips
6 volt 700 mA charger with alligator clips
For charging 6 Volt Pb-Acid batteries $20
add_to_cart.gif
$14.30 $12.80 $9.80
PST-3P10-6VB with barrel plug output
6 volt 700 mA battery charger for lead acid batteies with barrel plug output
For charging 6V Pb-Acid Batteries $20
add_to_cart.gif
$14.30 $12.80 $9.80
plugset PST-WX12 ---- Output adapter barrel plug kit
12 connector kit (see list below)
$7.00
add_to_cart.gif
Call Call $9.20
ZHJX002 adapters with a barrel connector input and screw terminal output Optional barrel plug to screw terminal adapter $2.50 each
add_to_cart.gif
     

Battery Charger Specifications
Model PST-3P10-6V also known as 3P10-A1007
Name 6 Volt charger for lead acid, sealed lead acid, etc.
ROHS ROHS available on special order
 
Battery Charger Technical Information
Rated input voltage 90-264 VAC, 50/60 Hz
Battery size 6 volt nominal SLA, VRLA, Gel, AGM, or flooded
Input Frequency 50-60 Hz
3 cells 6 volts nominal
Battery size 0.7 AH to 14+ AH
Charging current 1.2 amps or 1200 mA
Charger type Lead Acid, Sealed Lead Acid, Gel, VRLA Chemistry
Charging algorithm Constant current/constant voltage/float
Stage 1 constant current 1200 mA ± 100 mA
Stage 2 constant voltage 7.4 volts ± 0.25 volts
Stage 3 float charge 6.9 ±0.25 volts
"Charged" light turns on and float charge starts when the charge current is below 0.20 amps ±0.05 amps when the battery charge voltage is above 7 volts.
Style Desktop
Output power 14W maximum
Output voltage 7.4 volts maximum
Output options included Alligator clips or 5.5 mm OD x 2.1 mm ID barrel More barrel connectors available separately, see below
Protections Reverse Polarity, Short circuit protection
Weight 150 grams, 0.15 kg, 0.33 pounds, 5 oz
Cooling Natural convection, no fan
Efficiency >75%
Size 75 x 51 x 28 mm, 3 x 2 x 1 inches
Environment -10°C to +40°C operating, -40°C to +70°C storage
Vibration, Impact 5mm, 50Hz, 600 Seconds, 1 meter drop 3 times
Safety UL, cUL, CE marked, designed to ED60950, EN55022B
Temperature rise <40°C rise on case under any line voltage and maximum rated load
MTBF 30,000 hours by MIL-STD calculation
HiPot, ESD Hi-Pot 3000 V, 1 minute ESD 8000V
LED Indications Power on, but no battery connected Green
Charging Red
Finishing Charge Green Flashing
  Charged/Float Charging Green (may be dim Green)
  Reverse polarity or short circuit Red and Green Flashing Alternately
plugset
  • 2.35 OD x 0.7 ID Barrel
  • 3.0 OD x 1.1 ID Barrel
  • 3.5 OD x 1.35 ID Barrel
  • 4.0 OD x 1.7 ID Barrel
  • 4.75 mm OD x 1.75 mm ID Barrel EIAJ-03
  • 5.0 mm OD x 3.5 mm ID with center pin
  • 5.5 mm OD x 1.5 mm ID type 2 Barrel
  • 5.5 mm OD x 2.5 mm ID Barrel
  • 6.3 OD x 3.0 ID center pin Barrel
  • 6.0 OD x 4.4 ID center pin Barrel
  • 7.4 mm OD x 5.0 center pin ID Barrel
  • 7.9 OD x 5.6 ID center pin Barrel

Advantages:

OEM Battery Chargers Much lighter and smaller and more efficient 6 volt charger than transformer based chargers

OEM Battery Chargers Can be used to maintain the battery by being continuously connected, for example over the winter.

OEM Battery Chargers Very low cost intelligent multistage charger for 6 volt batteries.

OEM Power Supplies Universal Power Input 90-264VAC 50/60 Hz.

Safety Agency Compliance Clips or barrel plug options

Universal Power Input OEM Power Supplies and OEM Battery Chargers Available immediately off-the-shelf


Review

Re: Excellent Product and Customer Service
For years, on and off, I had searched with no luck for a compatible charger for the six volt-lead acid battery in my powerful hand-held searchlight. This included having burned up several standard chargers after the original quit. I finally found the perfect product with PowerStream Technology! Their “smart” charger has performed exactly as advertised, and has charged and conditioned my battery to original life and will maintain it. Also, PowerStream’s customer service was exemplary in quickly correcting a order error. As a result, I will be their permanent customer for any type of battery-charging device in the future. PowerStream’s web site provides clear and full technical details for anyone to select the correct charger. I highly recommend this fine company.
WB Hendersonville NC


[Home] [PowerStream] [Site Map]
[Tech Resources]
[Policy and Privacy] [Contact Us]

Thank you for considering PowerStream

Lead acid battery charger for 6 volt batteries. 6 volt charger, 6v charger, 6V battery charger, 6VDC lead acid charger

PowerStream Technology
1163 South 1680 West
Orem, Utah 84058
USA

Phone: 801-764-9060
Fax: 801-764-9061

© Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2008,2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Lund Instrument Engineering, Inc. All rights reserved.

Google Author Verification